Sangiacomo FANTASIA 1C HT is a single-cylinder single feed machine to produce high quality socks with multicolour patterns, with the possibility of mounting a kit for patterns in sculptured terry. It is  single-cylinder single-feed machine that incorporates technology to combine high production with top quality and extreme simplicity of use. Socks can be made with three-dimensional patterns and terry patterns in any shape (ST terry kit). The machine’s main motor has a hollow shaft and is integrated with the cylinder post. This solution eliminates the transmission between motor and machine, reducing the power consumption.




Single-feed machine with 6 yarn-finger units connected to 6 needle-selection units, designed for needle-by-needle selection in any part of the sock. SUPPLEMENTARY unit for selecting the sinkers for making terry patterns (ST terry kit);


  • Socks in plain mesh, normal terry and sandwich terry, in 5 colours plus the ground colour;
  • Possibility to carry out patterns in 5 colours plus the ground colour on the same course, for a total, on the sock, of 15 colours plus 2 ground colours;
  • Possibility of three-dimensional patterns;
  • Possibility of fillet-stitch patterns plus 5 colours;
  • Needle-by-needle selection of the elastic to obtain false ribs, with the possibility to have 4-colour patterns also on the elastic;
  • Double welt in tuck stitch plus 5-colour patterns;
  • Tuck and fillet stitches;
  • Socks with patterns in sculptured or profiled terry, possibility of pattern even with reciprocating motion (ST terry kit).



Yarn fingers:

N°. 8 on the main feed; N° 3 for each of the 5 colour feeds; N° 1 for the elastic feed;


Stitch regulation using independently adjustable stepper motors;


from the computer thanks to theSupergraphics software with the possibility of modifying the program directly on board the machine;


Equipment designed for connection to the Supervisor data acquisition system in order to monitor the production data;


3.1/4” -3.3/4”;

Number of needdles:

from 64 to 240;

Needle gauge :

from 24 to 54;


Approx 300 kg ca. – kg 340 ca. 
with Classic Linking;

Supergraphics e Supervisor:

are softwares developed by Sangiacomo and are targeted to solve in the most simple way the machine programming and the analysis of the production data.


Our Renowned Customers

Customer's Feedback

Go to top