Juki MO-50e - 2-Needle,3/4 Thread Overlock with Automatic Rolled Hemming and Differential Feed
General
Juki MO-50e is a 2-Needle,3/4 Thread Overlock with Automatic Rolled Hemming and Differential Feed machine.
Features
ADJUSTABLE DIFFERENTIAL FEED is easily controlled and adjusted by a dial located on the exterior, left hand side of the machine.
- STRETCHY FABRICS
- CRINKLY FABRICS
AUTOMATIC LOWER LOOPER THREADING allows for easy threading in seconds—simply push the automatic threader up and then thread goes through automatically.
AJUSTABLE LOWER KNIFE adjusts the lower knife quickly to change the width of fabric in the seam allowance, for perfect seams and rolled edges.
ADJUSTABLE STITCH LENGTH turn dial is located on the exterior right hand side within the range of 1 to 4 mm.
AUTOMATIC ROLLED HEMMING can now be created quickly and easily with built-in fingertip control. There is no need to change the foot or plate.
- OVERLOCK
- ROLLED HEM
RETRACTABLE UPPER KNIFE removes the upper knife so that threading is made safer and easier.
LAY-IN TYPE TENSION SLOTS throughout the machine make threading easy and efficient.
Specification
Sewing Speed | 1,300 spm |
Number of Threads | 3/4 Threads |
Needle | ELX705 |
Standard Overlock Width | Left Needle: 6mm |
Right Needle: 4mm | |
Rolled Hem: 2mm | |
Stitch Length | 1-4mm(Standard: 2.5mm) |
Differential Feed | 0.8-2.0 Ratio |
Built-in Rolled Hemming | Right Needle / 3 Thread |
Decorative Flatlock | Right or Left Needle / 3 Threads |
Presser Foot Lift | max 6mm |
Dimensions | 292mm(w)x295mm(d)x290mm(h) |
Weight | 7.4kg |